AP 22

المنتج: PERKINS Alternator: ECP 28-M/4 C نظام التحكم: DSE 6120
المقدمة
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
شهادة
  TS ISO 8528
  TS ISO 9001-2008
  CE
  SZUTEST
  2000/14/EC
مواصفات عامة
اسم ورقم النموذج AP 22
التردد (هرتز) 50
نوع الوقود Diesel
نموذج المولد الكهربائي وعلامته التجارية PERKINS - 404A-22G1
نموذج مولد التيار المتناوب وعلامته التجارية Mecc Alte - ECP 28-M/4 C
نموذج ذو لوحة االتحكم DSE 6120
الحجرة AK 11
3 الطور, 50 Hz, PF 0.8
الجهد الكهربائي طاقة ستاند باي (ESP) طاقة برايم (PRP) Standby Amper
kVA kW kVA kW
400/231 22 17.6 20 16.0 31.76
طاقة ستاند باي (ESP) : يستعمل الكهرباء المتغيرفي توفير الطاقة للحمولة في حال انقطاع مصدر الشبكة الآمن. ESP، متوافق مع ISO8528. لم يُسمح للتحميل المفرط.

طاقة برايم (PRP) : يستعمل الكهرباء المتغير في توفير الطاقة للحمولة من أجل ساعات العمل السنوية دون انقطاع. PRP، متوافق مع ISO8528. يتم استعمال ساعة واحدة من أجل التحميل الزائد 10% في فترة العمل 12 ساعة حسب ISO3046.
مواصفات المحرك
المحرك PERKINS
نموذج المحرك 404A-22G1
NO. OF CYLINDERS AND BUILD 4 cylinders - in line
الصدمة والتجويف mm 84 X 100
حجم الأسطوانة L 2.216
شفط الهواء Naturally Aspirated
معدل الضغط 23.3:1
السرعة d/dk 1500
OIL CAPACITY L 10.6
الطاقة الاحتياطية كيلوواط ساعي / حصان (الاجمالية) 20.6/27.61
الطاقة الرئيسية كيلوواط ساعي / حصان (الاجمالية) 18.7/25,06
عدد أجهزة تسخين كتلة المحرك
1
طاقة أجهزة تسخين كتلة المحرك (واط) 500
نوع الوقود
Diesel
نوع ونظام الحَقن
Indirect
نوع مضخة الوقود
Zexel Cassette type - In-Line
نظام التحكم
Mechanic
الجهد الكهربائي للتشغيل (فولت تيار مستمر)
12 Vdc
البطارية والسعة (الكمية/الساعة) 1x55
تيار الشحن المتناوب (أمبير)
15
طريقة التبريد
Water Cooled
سعة سائل التبريد ( محرك فقط / مع الراديتور) (لتر) /7.0
فلتر الهواء
Dry Type
استهلاك الوقود عند 100% حمل (لتر/ساعة) 5.3
استهلاك الوقود عند 75% حمل (لتر/ساعة) 4
استهلاك الوقود عند 50% حمل (لتر/ساعة) 2.9
مولد التيار المتناوب مواصفات
Manufacturer Mecc Alte
نموذج مولد التيار المتناوب وعلامته التجارية ECP 28-M/4 C
التردد (هرتز) Hz 50
الطاقة (كيلو فولت أمبير) kVA 20
التصميم   4 Pole,  Brushless
الجهد الكهربائي V 400
الطور 3
منظم الجهد الأوتوماتيكي DSR
منظم الجهد (+/-) 1
نظام العزل H
صنف الحماية IP23
عامل الطاقة 0.8
وزن المولد الكلي (كغ) 106
هواء التبريد m3 6.6
الحجم والوزن
فتح DRY WEIGHT (kg.)
(kg.)
الطول
(mm.)
العرض
(mm.)
الإرتفاع
(mm.)
سعة خزان (Lt.)
500 1291 850 1092 38
غطاء، DRY WEIGHT (kg.)
(kg.)
الطول
(mm.)
العرض
(mm.)
الإرتفاع
(mm.)
سعة خزان (Lt.)
AK 11
615 1851 906 1149 38
مواصفات معيارية
Water cooled, Diesel engine 
Radiator with mechanical fan 
Protective grille for rotating and hot parts 
Electric starter and charge alternator 
Starting battery (with lead acid) including rack and cables 
Engine coolant heater 
Base frame design incorporates an integral fuel tank and anti-vibration isolators 
Flexible fuel connection hoses 
Single bearing, class H alternator 
Industrial exhaust silencer and steel bellows supplied separately(for open sets) 
Static battery charger 
Manual for application and installation
الالات اختياري
ENGINE
• Remote Radiator Cooling
ALTERNATOR
• Main line circuit breaker
CONTROL SYSTEM
• Remote annunciator panel
• Remote relay output
• Alarm output relays
• Remote communication with modem
• Earth fault, single set
• Charge Ammeter
TRANSFER SWITCH
• Three or four pole contactor
• Three or four pole motor operated circuit breaker
OTHER ACCESSORIES
• Main Fuel Tank
• Automatic or manual fuel filling system
• Manual oil drain pump
• Residential silencer
• Enclosure: weater protective or sound attenuated
• Duct adapter ( on radiator)
• Inlet and outlet motorised louvers
• Inlet and outlet acoustic baffles
• Trailer
• Tool kit for maintenance
• Supplied with oil and coolant - 30 °C
• Battery isolating switch
نظام التحكم: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
الأجهزة
●DSE, model 6120 Auto Mains Failure control module.
●Battery charger input 198-264 volt, output 27,6 V 5 A (24 V) or 13,8 Volt 5A (12V)
●Emergency stop push button and fuses for control circuits.
CONSTRUCTION and FINISH
●Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface. Polyester composite powder topcoat forms high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
التركيب
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator)
المولدات وحدة التحكم
The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant temperature running hours and battery volts.
Module monitors the mains supply and switch over to the generator when the mains power fails.
The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving true first up fault condition of Gen. Set failure.The LCD display indicates the fault.

مواصفات معيارية
●Microprocessor controlled.
●LCD display makes information easy to read.
●Automatically transfers between mains (utilty) and generator power.
●Manual programming on front panel.
●User-friendly set-up and button layout.
●Remote start.
●Event logging (50) showing date and time.
●Controls: Stop/Reset, Manual, Auto, Test, Start, buttons. An additional push button next to the LCD display is used to scroll through the modules' metering displays.

مؤشرات القياس
ENGINE
●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

GENERATOR
●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Frequency.
●Gen. Set ready.
●Gen. Set enabled.

MAINS
●Mains ready.
●Mains enabled.
دارات الحماية
WARNING 
●Charge failure. 
●Battery Low/High voltage. 
●Fail to stop. 
●Low /High generator voltage. 
●Under /Over generator frequency. 
●Over /Under speed. 
●Low oil pressure. 
●High coolant temperature. 

SHUT DOWNS 
●Fail to start.
●Emergency stop. 
●Low oil pressure. 
●High coolant temperature. 
●Over /Under speed. 
●Under/over generator frequency. 
●Under/over generator voltage. 
●Oil pressure sensor open. 
●Coolant temperature sensor open. 

ELECTRICAL TRIP 
●Generator over current.


خيارات
●Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
●Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
المعايير
●Elecrical Safety / EMC compatibility
●BS EN 60950 Electrical business equipment.
●BS EN 61000-6-2 EMC immunity standard.
●BS EN 61000-6-4 EMC emission standard
مقوم البطارية الاستاتيكي (الشاحن)
● Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
● Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and 27,6 V for 24 V . Input 198 - 264 volt AC.
● The charger is fitted with a protection diode across the output.
● Connect charge fail relay coil between positive output and CF output.
● They are equipped with RFI filter to reduce electrical noise radiated from the device.
● Galvanically isolated input and output typically 4kV for high reliability.
الحجرة: AK 11
1 . Steel structures 
2 . Emergency stop push button 
3 . Control panel is right side of the set. 
4 . Corrosion.resistant locks and hinges 
5 . Sump drains valves 
6 . Sound proof foam metarial 
7 . Base frame .tank
المقدمة
Sound–attenuated and Weather-protective Enclosures Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.
مواصفات معيارية
Compact footprint, low profile design. 
Enclosure, generator set, exhaust system and fuel tank are pre-ssembled, pre-integrated and shipped as one package 
Body made from steel components treated with polyester powder coating 
Fire retardant foam insulation 
Easy access to all service points 
Exhaust system inside canopy 
Large doors on each side 
Control panel viewing window in a lockable access door 
Emergency stop push button mounted on enclosure exterior 
Cooling fan and battery charging alternator fully guarded 
Fuel fill and battery can only be reached via lockable access doors. 
Lifting points on the top of canopy and base frame 
Customer options available to meet your applications needs. 
Aksa makes its generating sets' noise level tests in accordance with directive 2000/14/EC validation of the noise level test has been aproved by the notified body Szutest

نموذج ذو الحجرة AK 11
العرض mm. 906
الطول mm. 1851
الإرتفاع mm. 1149
سعة خزان Lt. 38